Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MX-One TSW with One box 4.2

Status
Not open for further replies.

leandrodes

Technical User
Jan 4, 2010
7
0
0
BR
Hi, a need to install One Box 4.2 for voice mail, i have Ericsson TSW SP6, IPLU card, Cable RJ45/RJ45 but i don't know the procedures, I realized the following commands.

ipboi:bpos=1-1-60,ip=192.168.1.1,mask=255.255.255.0;
ipgdi:lim=1,domain="Voice",codlst=c-8&b-8;
gespi:csp=0,traf=1100151515,serv=2071501001300,cdiv=11511110,roc=023001,npres=1010;
gedii:dir=1000&&1007,csp=0;
ipexi:dir=1000&&1007;
icfui:ifcind=1,user=generic,updfcn=yes;
icfuc:mwf=all;
icmwc:sid=01,dtxt=1008,dig=1008,kfcn=mwc;
ghgri:grp=1008,lim=1,serv=10000,traf=15,sel=11000,que=10;
ghgmi:grp=1008,dir=1000&&1007;
vmgei:ifcind=1,dir=1000&&1007;

i conncted cable rj45/rj45 in ipu
i install MX-ONE Server voice mail, but don't conplete, because not comunnication server and tsw.

I need to install a cable niu2 to the server, need more command mml and what ip a need in serer or DHCP?

thanks.
 
If you check ICFUP;, you will see that the USER= GENERIC.

This means that you do not need the NIU, but only IPLU.

The server needs to be installed according to Aastra's descriptions.
Windows 2003 SP2 is required.
Make a simple network with a small switch and LAn cables to the IPLU and to the OneBox server, then it will work out.
Make sure that you have the correct dongle and license file.

///doktor
 
Thanks, my dongle this installed correctly, my server is a windows server 2003 R2 SP2, but i don't have a switch.

I need to configure my server for a static IP or Dynamic? and i don't understand the part of ICFUP:user=generic;

I have a problem, has a NIU2 in my system??
ps: I don't has a AAU in my system only NIU2.
My main problem is when I am installing the software on the server and it asks to select switch and integration, but I can not choose, do not open the options.

Thanks.
 
You need to have a license that says SIP and RTP and the number of channels. In the example below there are 12 channels. If you do have this in your license, it will work.

OneBox
Ericsson
S/N xxxxxxxxxxxxxxxxxxxx

Configuration
V-Version: 790
L-Voice Ports: 12
A-Automated Attendant
O-Email Access
F-Fax Ports: 255
P-Languages: 5
D-Storage: 50000
s-Subscriber Mailbox: 208
M-Voice Mail
l-Company Name:
m-Dealer Name: Aastra Sweden
G-Fax Mail
E-FaxText
k-All Ericsson Integrations: xxxxxx
h-RTP: 12
b-SIP: 12

///doktor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top