Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

mx-one 5.0

Status
Not open for further replies.

sajeshS

Technical User
Jul 22, 2012
15
IN
does anybody hav any docs that describes installation procedure of mx-one 5.0 ?
 
installation with recovery DVD or by upgrading with the installer package over an existing mxone 4x version?
 
should i upgrade SLES10 SP3 to SP4 incase of uplifting from v3.2 to v.5.0?
 
I've upgraded hundreds of mx-one 3.2 to 4.1 and then to 5, between mx-one versions 3.2-5 the SLES also was upgraded, so it must be upgraded also.

To upgrade with Recovery Dvd, you need to make PCREGEN from the old version 3.2. You need an version of PCRegen that has as source MXone 3.2 and as target system mxone 5 or 4.1. After you take the PCREGEN you reinstall the PBX from the Recovery DVD and you make ts_startup step. After you passed ts_startup and inserted your PBX IP's, you upload(I've used WinSCP) on the PBX the target folder generated by PCREGEN then you run the following commands in Putty after you've uploaded your license file!:

your_PBX# cd /pcregen-target-directory-uploaded-by-you
your_PBX /pcregen# dos2unix REGENCMD.TXT
your_PBX /pcregen# mdsh -c /pcregen/REGENCMD.TXT |tee /pcregen/PCREGEN_LOG.TXT

You should wait for the PBX pcregen to upload on the system, also you could check the log file to see if something was not imported.

The upgrading procedure from upgrading package mx-one 5 is more elaborate and it supposed that you upgraded the SLES packages to the last version and also upgrade SLES version to SP4 minimum, then run the mx-one 5 installer archive. But this method is more advanced as you need to have knowledge about Linux
 
You need PCREGEN version 5.2 build 03 minimum to upgrade straight from 3.2 to 5
 
thnx for the reply...

but one doubt...


the command used to pcregen backup firing in 3.x and 4.x was

lim# home/eri_sn_admin/pcregen/init # source REGENCMD.TXT |tee ts2.log.txt


did aastra changed that cmd in 5.x to
your_PBX /pcregen# mdsh -c /pcregen/REGENCMD.TXT |tee /pcregen/PCREGEN_LOG.TXT

??"

BR
sajesh
 
Hello,

My mistake forgot to put the source

your_PBX /pcregen# mdsh -c source /pcregen/REGENCMD.TXT |tee /pcregen/PCREGEN_LOG.TXT

 
Hi Sajesh,
There has be no change to this command from version 4.
The 'source' comand is a Linux command and since we are already at the Linux prompt, the use of 'mdsh -c' is completely redundant.
The path show i the alternate is also an error since the starting'/' takes us to the root of the directory tree.

The source command you suggest in your post from versio 4 is OK to use.
 
hi

currently i am having single lim 3.2 sp3 with lsu-e.....am going to upgrade to 5.0 with MGU and gong to add one more lim...
my doubt is that if an extn havng equ 001-0-20-11 will regenerated to 1A-0-20-11 ON PCREGEN since MGU cames into picture?

and secondly , i am having One Box with IPLU..i heard that MGU n IPLU will not co-exsists...if its true what will be the configuration for One Box...?

BR

Sajesh
 
Even if you were keeping the LSU-E, the first media gateway would be 1A.
The function of the IPLU is replaced by features in the MGU so no problem there either.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top