Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MWI Tone

Status
Not open for further replies.

morenot

Technical User
May 8, 2007
499
MX
Hi:

How I do to cancel Message Waiting tone
I erased all voice Messages( 557 + #1), however, when I hang off I continues heard different tone.
This happened with Analog Sets
If I erase my greeting, the MWI tone is canceled

thanks....

 
Try to disable the board in PGM101 and PGM103, and re-install it again in PGM101 and PGM103.


///doktor
 
Thanks..

Ohtapa:

I dialed 559, MWI tone is canceled...but..
The call forward to voice mail is canceled, when I call forward to VM again( 554 + 4 + #), the MWI tone is enabled..
There aren´t voice messages (I dial 557 and get busy tone)

Doktor:
I will try disable the VMIU board...
 
I'm guess the "MWI tone" and "Forward confirmation tone" using the same tone. So when you activated the call forward you can heard the same tone.
 
It´s correct Ohtapa
But, How I do to cancel that Tone, if I don´t have messages.
Or, the Tone is always when you have Call Forwad actived regardlees you have or not messages...
Do you have working whit Auto Forward feature

 
It´s working...
With AUTO FORWARD Feature...

 
Yes, with the kind of Auto Forward to VMIB you will not heard Forwad confirmation tone. And if you using version 3.8 up you can have a optional to disable forward tone in PGM 113 flex 17. This option can see only in DKT program mode.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top