MWI isn't working on this 500 set

[ithd06]

Can anyone of you help with this? The MWI won't work on this set- not sure if the problem is in the PBX or Messaging software.


TYPE: tn
TYPE TNB
TN 28 0 12 13
DATE
PAGE
DES

DES ODM784
TN 028 0 12 13
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 4303 1 MARP
CPND
NAME ACU INFUSION
XPLN 12
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 4444
TGAR 2
LDN 0
NCOS 3
SGRP 0
RNPG 0
XLST
SCI 0
CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRA AGRD CWD SWD MWA RMMD SMWD LPA XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
USRD BNRD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTU CDMR
RCO 0
PLEV 02
CSDN
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR FDN 4444
DATE 17 OCT 2005

Thanks
Jessica

 

[GreenB246]

Try CLS LPA if it has a MWI lamp on the set
LPD for stutter dial tone

 

[spunkysus]

Is this a Nortel 550 set? If so it seems as if the programming is correct,assuming that 4444 is your voicemail hunt extension.If using Mermail I would check under that mailbox to ensure that the MWI is designated for extension 4303.

Thanks,

 

[Johnthephoneguy]

Verify it is set up correctly in your voicemail as the MWI DN.

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[56BelAir]

If this is a cs1000 chassis you must set the dip switch's to allow 150 volts to the set. along with the above post CLS=LPA

 

[ithd06]

Great- thank you. I double checked the programming and found that the problem was on the messaging end.
Thanks again,
Jessica