MWI Audit / reset all in CP

[NortelGuy1979]

Hello,

I'm looking for a way to go thru and have CP reset all the MWI, just like the option that is in MM ETAS (or Tools, I forget) menu.

I have searched high and low, even in the Support Tools and can't find it. I have a feeling I'm brain-dead today, but any help would be appreciated.

Thanks!
-Matthew

Matthew - Technical Support Engineer

 

[bigindian65]

Add a cancel key your phone:
KEY x MCK
Press it, then dial the phone with the lamp on.


Also:
Lamp Audit

LD 77
.DLMP 0

Mato' Was'aka

 

[NortelGuy1979]

Hi BigIndian,

Thanks for your reply. I know I can manually turn it on and off, and I also know I can turn on lamp audit. I'm looking for equivalent functionality to what MM had that would go back thru and reset all the MWI lights based on the mailbox status.

Is that available in CP?

Thanks,
Matthew

Matthew - Technical Support Engineer

 

[allenmac]

That might be in the distributor tools, but it's not anywhere in the CallPilot Manager.

 

[bigindian65]

that's an audit in ld 77 though, never used it.....

Mato' Was'aka

 

[eleung333]

If looking reset MWI based-on mailbox status, it shouldn't looking PBX but voice mail system.