MVB 9.0 on EX controller Analog sets

[Hawaii5O]

Has anyone configured analog sets on the EX controller MVB 9.0

 

[techymitel]

Yes, using the 4 port FXS card. It's easy.

When you add your new user from users and services, under the 'service profile' tab select 'analog-FXS' as the device type from the drop down box.
Then choose which FXS slot and circuit to use from under 'device details' tab and 'endpoint ID'

 

[Hawaii5O]

i tried that and it said no endpoints available. In the EX controller GUI I can see the FXS ports and they all say Idle. Am I suppose to freate another profile for the FXS ports?

 

[techymitel]

What do you see under 'Users and Devices' / 'Advanced Configuration' / 'Analog Telephones' / 'Gateway Sets'?

It should show you the FXS circuits available and any configured extension numbers. Do you have any spare?

 

[Hawaii5O]

there are no endpoints in the Gateway sets form but I have 8 FXS ports on the EX controller.

 

[techymitel]

What do you have in the EX controller slots?

There are some card position rules that might stop the MiVB from seeing your FXS cards.

Slot 1 must be PRI if present or DSP

There can't be gaps between cards. So you can't have DSP in slot 1 and FXS in slot 3 with nothing in slot 2

If slot 1 is empty and there are other cards in other slots, they won't be recognised.