Mutitech Multi VoIP AV gateway

[bobbdeep]

Has anyone successfully used the Multitech AV VOIP gateway with an IPO?
We are looking for a gateway that will allow us to use analog cordless phones in a remote site connected to an IPO at the main office.

 

[basboers]

Hello,

I only connected a IPO with a SIEMENS HiPath on BRI and that worked fine, we have used the MVP410ST-EU on both sites. Maybe this wil help..

http://www.multitech.com/DOCUMENTS/Collateral/data_sheets/86002073.pdf

or look on the Avaya site there's some info on it.

greetzz..Bas

 

[Phoneguy15]

The MultiTech AV Gateways are for use with Avaya Communication Manager systems only. They will not work with IP Office.

 

[JayNEC]

It will work if you have a MVoip on both ends.
Analog out of the IPO to the MVoip, MVoip to MVoip Trunk to the remote office, then analog out of the second MVoip.

MVoip as a H.323 device off the IPO is not supported.

This method will work with any phone system that supports Analog (any that don't?) I've done it with a partner system....

 

[JayNEC]

Hence, my question in an earlier thread about the One-X QE to IP Office SIP trunks. There is a 4 port analog terminal gateway coming out, as well as the existing 4 port trunk gateway.