It has been a long time... But I think its in system programming>aux equip. You need to assign a line to it, IE 820 or whatever. If you still can't figure it out, post back and I'll dig thru my books.
If you're programming from SPM, print out the System Setup and see if a MOH line is already programmed.
System Programming-Exit-More-Print-System Setup
Otherwise, it's just as described above, but be aware that the system will be forced idle, and if there is anyone on the phone, YOU will have to wait until they hang up. The screen will tell you who is still off-hook, and as they disconnect, they will go forced idle, until you can get to the next screen.
If the line your trying to assign is in a pool or a personal line or in use in any way on the system you'll have to remove it and make it vacant befire you can assign it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.