Music on hold question

[vincesousa]

We have 2 IP offices connected over a WAN link. Both of them are on different subnets, but right now they are both using the same holdmusic.wav file. Can both of them use different holdmusic.wav files if they are pointed to the same TFTP server? In this case they are both pointed to the same IP address of TFTP server.

 

[azrael2000]

Hi VinceSousa...

Why not just put the holdmusic.wav file on the Control Unit via Embedded File Management?

Regards

 

[vincesousa]

Because we do not have a memory card.

 

[Westi]

just make one holdmusic2.wav and set it in the system to use that instead

Joe W.

TeleTechs.ca
FHandw, ACSS (SME), ACIS (SME)


“This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[azrael2000]

Hi Vince.

No memory card? Eep... this should be added to the system SD card. If you don't have one of those, how in the name of the Incarnations does your system run?

Regards

 

[Bas1234]

Try here,

http://support.televersal.com/entries/23381628-IP-Office-Music-On-Hold-MOH-

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[techmoderick]

IP500 V1 does not have an SD card.



Hi Vince.

No memory card? Eep... this should be added to the system SD card. If you don't have one of those, how in the name of the Incarnations does your system run?

Regards