markonhold
Technical User
Does anyone know how an external Music on Hold POrt gets connected to a HiPath 400 System? And is there any programming to be done and how?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Music on Hold on Siemens HiPath 4000
- Thread starter markonhold
- Start date
- Status
The external Music must be connected to an Analog extension port (SLMA..)
The Impedance of the music source for best results must be 600ohms.
The analog extension port must be programmed as follows
ADD-SSC:1-2-43-23,EXTANN,MUSIC,0,G711&G729OPT&ML&VIAHHS;
Then you just have to connect the music source output to the extension on the MDF, and that should be it...
The Impedance of the music source for best results must be 600ohms.
The analog extension port must be programmed as follows
ADD-SSC:1-2-43-23,EXTANN,MUSIC,0,G711&G729OPT&ML&VIAHHS;
Then you just have to connect the music source output to the extension on the MDF, and that should be it...
- Status