Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Music on hold in TSE 5 SP4

Status
Not open for further replies.

samsal

IS-IT--Management
Mar 16, 2013
33
JO
How to configure the MOH in TSE version 5 with SP4?

Should i use the TMU or there is another way by putting the wav file directly in the server??
 
firtstly u should connect tmu board with moh cable to any audi device
then with the command recorded voice announcement to every extension RADNI , RACEI
 
There is no other way? like just uploading a wav file in the server? without using TMU or external cables.
 
If your are using MGU boards you can loa the file to MGU (use Manager Provisioning)

The recording format is Pulse Code Modulation (PCM), according to ITU-T recommendation G.711 (A- or m-law, mono, sampling frequency 8000 Hz).

RAMDI:ANN=xx,,MSG=xx;
RACEI: DIR=yy,CONT=xx;
ASPAP Parnum 161

see also ALEX description "Recorded Voice Announcement INSTALLATION INSTRUCTIONS" (2/1531-ANF 901 14 Uen G5 2013-07-26)

best regards,
Norbert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top