Not clear what you are trying to do. If installing an analog MOH device, you set it up as a port, then connect the device to that port. If you are using an integrated announcement on a gateway v9, You would add an announcement and upload your MOH file to that. Then the "change music" for will let you select that announcement extension as a music source.
• connect the lineout of a music source (like a cd player for example) to an analog port in avaya
where you would normally connect an analog line/phone).
• change music-source and define your port
• music source is 003V613 pair 13 of MM716 card
• change cor 6
• Hear System Music on Hold? y
This is a Simple MOH
No Groups
Thanks to everyone for their input
connect the lineout of a music source (like a cd player for example) to an analog port in avaya
where you would normally connect an analog line/phone).
Using the Headphone Jack and Earbuds (supplied with radio) punched down on the Analog Port
• change music-source and define your port
• music source is 003V613 pair 13 of MM716 card
• change cor 6
• Hear System Music on Hold? y
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.