Multitray Printing Using Crystal/VB

[gubhare]

Hi,

We are using multitray printers. I have developed some report which I want to print on this printer. There are few reports which I want to print on the same printer. Since the printer has only one port I can redirect the print on diff. tray from the crystal report.

Does anybody have a solution to this problem

Cheers
Ganesh

 

[gubhare]

A little additional information...

We have developed an ERP system & we are suppose to be going live on 10th of MAY and since the deadline is so close I am badly stuck with this problem. Since the client is using Multitray printers and I have never used these kinf of printers I am facing problems in redirecting the report to 2 diff trays. Actually I have 2 reports to be printed on this printer. One report should get printed on upper tray & the other report should get printed on the lower tray. The lower tray report is a detail report & the upper tray report is a summary report. So the objective is to print this report in such a way that after the detail report is printed , the summary will be printed in the upper tray so the users dont haver to sort & group this reports.

Thanks a lots once again

Cheers
Ganesh