Multiple Wan IP How ? 1

[larsjuhl]

I have a ISA 2004 and I want to use it as edge firewall.
I have multiple IPs provided by my ISP and I want to be able to controle traffic coming from those Ip adresses. I have configured the Adapter connected to the WAN router with the IP adresses from my ISP and I can access the firewall from them, but how do I go to configure Network sets so that I can say eg:
RDP allowed from a specific WAN IP to Local host.

It only works if I use the External network that ISA creates, If I create a network called External 2 and specifies one of the adresses from my IP it does not work.

Hope anyone can help me

rgds,
Lars

 

[larsjuhl]

q

 

[coco10]

hi, this may be helps you

http://www.isaserver.org/articles/2004multdmzp2.html

coco10

 

[larsjuhl]

thanks I have read these but I downt feel they give me the information at least not what I need right now...
I have a Zywall box now configured with a dmz and 8 WAN Adresses are configured on that box to go to various equipment on the DMZ and LAN.
How do I make the ISA 2004 use these 8 WAN addresses and route the traffic to the correct server ? do I need one network card for each WAN ip ? or ?

thanks for trying to point me in the way

Lars

 

[coco10]

In the server publishing rule you can assing wich ip its listen by the listener, to do that go to the listener/network select the external network and click in adress and there select specified ip adresss and ther you have all the external ip of the isa server select 1 and thats it.

hope its helps.

coco10

 

[larsjuhl]

ok now i see... that helped!!

that was easy....!! when you know it )
Perfect thanks for your help!!