GeddonArma
MIS
We have an application that creates print jobs which print to different trays on the same USB attached Lexmark 622.
We create the print job for tray 1 and then the print job for tray 2 and then the app automatically starts the process again, tray 1 and then tray 2.
For some reason, the printer prints all the tray 1 jobs and does not start printing the tray 2 jobs until all of the tray 1 jobs are complete.
We have defined two seperate printers for the same printer port, one with tray 1 as the default and one for tray 2.
How can we get it to print the first job in tray 1 followed by the first job in tray 2 and so on?
We create the print job for tray 1 and then the print job for tray 2 and then the app automatically starts the process again, tray 1 and then tray 2.
For some reason, the printer prints all the tray 1 jobs and does not start printing the tray 2 jobs until all of the tray 1 jobs are complete.
We have defined two seperate printers for the same printer port, one with tray 1 as the default and one for tray 2.
How can we get it to print the first job in tray 1 followed by the first job in tray 2 and so on?
