Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multiple PUB. OLI BCM 450

Status
Not open for further replies.

Scrik23

IS-IT--Management
Jun 2, 2015
2
GB
Hi All,

I am working for a company that administers a number of branded schemes and we are looking for a solution to multiple PUB OLI. this is because each branch has a separate number and we want to call the customers on that number.

Is it possible to have an operator assigned OLI?

Or would we need to assign different line Pools and give them external numbers? or mark the external number on the lines?

EG:

Brand A = Lines 1 - 10
Brand B = Lines 11 - 20

Many thanks
 
Never heard of an Operator OLI

OLI is for Caller ID to whom you are calling and is programmed on a set level basis.
OLI is not available for POTS lines, only PRI/BRI

For POTS lines your carrier controls the Caller ID (CLID).
You may need to rollover groups from the carrier.

Brand A
Their lines are in Pool A
Their sets have access only to pool A

Brand B
Their lines are in Pool B
Their sets have access only to pool B





________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

small-logo-sig.png

Toronto Canada
 
Hi Curly,

Thank you for your reply - I will make contact with the carrier and see what solutions they recommend :)
 
It depends on the type of the lines you have
If analog lines you can do it from routing table
e.g 9 to analog line 1
8 to analog line 2
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top