Hi,
I configured an external RAID-box to have a SCSI-ID 6 and expose 2 RAID-Sets to LUN 0 and 1 on this SCSI-ID.
The OpenBoot prompt displays both logical units correctly (probe-scsi-all).
But when I use the "format" tool, Solaris displays only one unit as disk (the first one).
How can I install both logical units from SCSI-ID 6 (my RAID box), so I can use both logical drives?
The point is: the RAID is connected to the Sun V440 server using SCSI-ID 6 (Server is ID 7). The logical drived from the RAID are only visible to the Sun through LUN's on that SCSI-ID. Solaris seems to see "one" LUN correctly. But not two LUN's on one SCSI-ID.
Is this setup possible. If yes, what can I do? Can anyone point me into the right direction, pease?!
I configured an external RAID-box to have a SCSI-ID 6 and expose 2 RAID-Sets to LUN 0 and 1 on this SCSI-ID.
The OpenBoot prompt displays both logical units correctly (probe-scsi-all).
But when I use the "format" tool, Solaris displays only one unit as disk (the first one).
How can I install both logical units from SCSI-ID 6 (my RAID box), so I can use both logical drives?
The point is: the RAID is connected to the Sun V440 server using SCSI-ID 6 (Server is ID 7). The logical drived from the RAID are only visible to the Sun through LUN's on that SCSI-ID. Solaris seems to see "one" LUN correctly. But not two LUN's on one SCSI-ID.
Is this setup possible. If yes, what can I do? Can anyone point me into the right direction, pease?!