Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Multiple Hop Forwarding ??

Status
Not open for further replies.

Daudet

Vendor
May 29, 2006
49
CA
Hello to all
the issue i have is the following.
I have extension 6404 FWD to a Cell 514-4xx-7xxx. so far so good it work for calls received internally and externally thru DID.
I have another extension 6438 that is FWD to ext 6404.
Anyone calling 6438 end up to 6404 even if forwarded to Cell. It stop after the first forward.

I know in AVAYA CM world that's the way it works only one level forward. Is is the same on IP Office.

Customer was able to do it on its old Nortel...

thank for your inputs.



Daniel Audet
Avaya Application Specialist
MTS Allstream
Montreal, Quebec, Canada
 
Do you have forward unconditional and forward internal calls set to on?

Chris
ACA- Implement IP Office
 
Also why not forward 6438 to the cell phone directly?

Chris
ACA- Implement IP Office
 
route call directly to cell using forwarding tab on user, and remove voicemail from the extension being forwarded. If you have voicemail set on the initially targeted user calls will always cover to the intended recipinets mailbox no matter what, unless redirected in VMPRO via a leave action, or if voicemail is flat out disabled.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top