Multiple Extention Hunting then go to VoiceMail 1

[DCMHPCDOC]

I have 4 extentions that I want to set up forwarding on... for example

If ext 131 (main department ext #) is busy, I want it to ring to 220. If 220 is busy I want it to ring to 297. If 297 is busy I want it to ring to 382. If 382 is busy I want it to go to voicemail for ext 131.

Is this possible? If so how?

Any and all help is greatly appreciated.

 

[hawks]

Use the hunting feature

 

[dnc16]

Also under CLS you need to add SFA on the extensions

 

[DCMHPCDOC]

I don't really know how to setup hunting or anything. I can add analog sets, change names, and a few other "little" things and that is about it.

 

[McGruff753]

The only problem with that is it could take 16 rings before voicemail answers (4 for each phone). If you have the available key, I would replace an autodial with an appearance of 131. This way it would ring on all sets at the same time and the deafult would be 131's voicemail.

 

[cmawbey]

are the 4 sets analog or digital ???

Colin

 

[DCMHPCDOC]

They are all digital 2008 sets

 

[Jay2003]

Configure a MCR on a key and have all sets hunt to voice mail, The MCR should be on key0.

Jason

Where's the button @.