Will setting a PBX up with 2 customers instead of 1 allow you to prevent calls from certain DN's on customer 0 from calling dn's on customer 1? If so, do you have to build a seperate data block in load 15 for each of the customers? I only want the second customer to be able to call another DN with the same customer number. This is a training situation where I will have only three telphones and they will only call between each other. Customer 1 will have no trunks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Multiple Customer operations
- Thread starter WaltNC
- Start date
cust 0 can not call cust 1.. ever.. work around is a tie trunk between the two, one dual pri card looped back to itself with dsc's.. i've done that for training, letting my more advanced students add the pri's in the evening class.. teaching the morning class to add steering codes..
if you want another twist, add tenant service to each.. then you can do ten to trunk group access..
john poole
bellsouth business
columbia,sc
if you want another twist, add tenant service to each.. then you can do ten to trunk group access..
john poole
bellsouth business
columbia,sc
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question