multiple CFNA rings options X1123.55 1

[senk1s]

option11c 23.55 - right nor cfna is set to 4 rings ... to voicemail sdn
is it possible to have a differnt say 6 or 8 rings for a few extensions ...

in ld15 i see only 1 CFNA parameter

 

[wdhb]

TYPE RDR_DATA
CUST 00
OPT CFF CFRA DSTD PVCA CWRD
FNAD FDN
FNAT FDN
FNAL FDN
CFTA YES
CCFWDN
CFN0 3 This RC0 = 1 in LD10/LD11
CFN1 5
TYPE RDR_DATA
CUST 00
OPT CFF CFRA DSTD PVCA CWRD
FNAD FDN
FNAT FDN
FNAL FDN
CFTA YES
CCFWDN
CFN0 3
TYPE RDR_DATA
CUST 00
OPT CFF CFRA DSTD PVCA CWRD
FNAD FDN
FNAT FDN
FNAL FDN
CFTA YES
CCFWDN
CFN0 3 This is RCO = 1 & is 3 rings LD10/11
CFN1 5 This is RCO = 2 & is 5 rings LD10/11
CFN2 7 This is RCO = 3 & is 7 rings LD10/11

 

[senk1s]

you da man
thanks wdhb ...

 

[coniglio]

these parameters can be changed, by the way. For example, if your CFN1 is set to 3 you can change it to four. Then anyone's phone who is set to RCO1 will ring four times instead of three. Also, CFN0 equals RCO 0, not RCO 1. CFN1 equals RCO 1, CFN2 equals RCO 2.

 

[senk1s]

set the values of CFNO in ld15 in RDR_data

vary the values of RCO in the set programming ld 10

search the forum, there was a detailed thread