Multi-subnet NetBios

[Hungster]

i have a little problem with netbios names across different subnet, trying not to use RIP
and trying to use LMHOST, following the setting and ip and names, did all the lmhost on clients, rebooted everything

still can't see each other on neighbour hood, please help help

 

[cclausen]

If you have different subnets you will need to use WINS.

Chris

 

[Hungster]

Been using WINS for a while, i am using HP VG
bet you 100% it is my dumb-A** HP VG hubs, going to rip it out and put cisco switches in.


thanks
AoE