Multi-party calling on BCM w/ Polycom Soundstation2?

[pjevnisek]

We have a Polycom Soundstation2 (analog version) plugged into the BCM with an ATA2 adapter attached to it. I am trying to place a conference call by following the instructions in Polycom user manual. Somehow it doesn't seem to work as I can't place the second call. Does the BCM support multi-party calling in such a setup? Is there anything that may need to be configured on the BCM to support this feature?
Thanks in advance.

 

[jbenpeter]

If its a BCM a 4.0 you will need to press flash *807 to draw second dial tone and flash *3 to join the parties. If its a lower version Flash *2 and Flash *3 should do it.

 

[ArrJay21]

How about an RCA model 25001RE2 phone? We are putting in a BCM 50 and they currently have some old Panasonice system. Anyone ever see that?

 

[bfitz8339]

If you are running 4.0 on the BCM go to Auto Hold in Capabilities and change it from no to yes.