MSM310 , 2 VSC, 2 VLANs, no internet.

[drovsky]

Hi,
in the past days i've tried config new HP MSM310 (Colubris), and had it to my network with no success.
I don't know what else i can do, because i think i'm missing something but don't know what... Need help from other point of view.
My core switch config is ProCurve Switch 5406zl.
One of other switch is a 2626 (J4900B), where aps are connected.
Have 3 Vlans: General (201.0.0.0/24), Wifi-External (10.0.0.0/24), Wifi-Internal (192.168.12.0/24).
Configure 2 VSC. Wifi-External (Vlan 11), Wifi-internal (Vlan 12), on the new MSM310. I can access all network, but i cannot acess internet. I have another old ap (Procurve 420), that is working fine, with the 2 ssid's, and with VLans and ACL's with the same config as the MSM310.
Can anyone help me here??

 

[drovsky]

When i'm connected (SSH) to the AP MSM310 i can ping all network, the gateway (201.0.0.254 - inclusive) and DNS servers.
Connected to Wireless i received correctly, DHCP IP on each vlan.
If i connect to Wifi-External i receive i.e. 10.0.0.171/24 gw 201.0.0.237/24
If i connect to Wifi-Internal i receive i.e. 192.168.12.171/24 gw 201.0.0.237/24
When connected wirelessly, i can ping 201.0.0.237 (IP of VLAN 1 in core switch), i can ping each vlan ip core switch, but i cannot ping gateway (201.0.0.254) or google.com

 

[sarond]

Are you sure you should be in the Mitel forums asking this question?

It looks like the gateway addresses that you get wouldn't work. I thought it had to be in the same subnet as your IP Address. I would think your gateway address should be the VLAN IP address of your core switch.

 

[drovsky]

Solved the problem.
Disabled the option:
"Wireless Security Filters"
On the VSC...