MSDL error msg

[byrontel]

Getting MSDL error message....see below.
seems to mean "application data space has been corrupted".
Device number 13..
Below is message followed by cfn info.
How can I correct this?
Thanks

ERR MSG:

MSDL201 GROUP 0 MSDL 13 00000000

MSDL201 GROUP 0 MSDL 13 00000000

MSDL201 GROUP 0 MSDL 13 00000000


CFN:

ADAN PRIM DCH 13
BDCH 17
CTYP MSDL
GRP 0
DNUM 13
PORT 0
DES xxxxx
USR PRI
DCHL 18
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC D100
SIDE USR
CNEG 1
RLS ID 36
RCAP ND2
MBGA NO
OVLR NO
OVLS NO
T200 3
T203 10
N200 3
N201 260
K 7

 

[atascoman]

You can try doing a force download on the DCH. You do that by disabling the DCH in LD 96, then when you enter the enable DCH command put FDL after the command. You might have to do the FDL in LD 48, but it should work from Ld96

 

[byrontel]

will any of these actions be service affecting?

 

[telebub]

Yes

 

[byrontel]

Thanks...so after hours would be best then.

 

[byrontel]

Is there any value in Resetting DCH or MSDL (rst MSDL,rst DCH) ? and would that affect service?
Thanks

 

[bhassell2000]

Ressetting the DCH will stop calls from starting or hanging up on that circuit but if a call is up it will stay up. Resetting the MSDL will take all of the DCHs on that card down. Be careful, disbale the MSDL if you plan to pull the card out, it will reset the switch.

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[byrontel]

When I look for (stat dch) in ld 96 it does not even list DCH 18 which is my dnum 13 in CFN.
Does this mean I can disable dch 18 only in ld 48?
When I stat MSDL group 0 it lists only MSDL 13.
Thanks

 

[Firebird Scrambler]

Do you get BUG201?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[byrontel]

Just the MSDL 201 message