Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MPS 500 Question
- Thread starter wofting
- Start date
- Thread starter
- #3
John,
Are you saying there is a way of scanning the ports using an administrative script? I am still really new to MPS so this info would help.
On other platforms I have been able to write a script that just looped through a range of channels and checked the line-status. If it was down it emailed me. If I could do this here it would really help me get to the underlying reason for the D-spk status.
The application I am debugging is just over 1000 blocks and the d-spk is quite random on any of 24 channels. I am trying to do an AMU trace but watching just 1 channel means it could be days before that channel locks.
Are you saying there is a way of scanning the ports using an administrative script? I am still really new to MPS so this info would help.
On other platforms I have been able to write a script that just looped through a range of channels and checked the line-status. If it was down it emailed me. If I could do this here it would really help me get to the underlying reason for the D-spk status.
The application I am debugging is just over 1000 blocks and the d-spk is quite random on any of 24 channels. I am trying to do an AMU trace but watching just 1 channel means it could be days before that channel locks.
- Status
Similar threads
