Moving phone to new location

[steeltech]

I'm moving an end users phone from one building to another. I outed his old TN so I can move it to the new TN but it is not working for me. This is the steps I took:


LD 11
REQ: out
TYPE: 3902
TN: 17 14

That finished so then I changed to LD 20.

LD 20
REQ: MOV
TYPE:3902
TN: 17 14 (This is where I get an error. It seems to not take his old TN.)

When I do a STAT on 17 14 it says: UNEQ.

The building he is moving into is a new building where new lines were run. He will be moving to a completely new TN.

Can anyone help?

 

[tnphoneman]

You deleted the TN programming. There is nothing there to move. You need to rebuild the set from scratch on the new TN. Hopefully you have a printed copy.

Only way to recover is to sysload before a data dump occurs. Not a good choice.

 

[callenj]

You can not move a tn that has been removed. You will have to build a new phone on the tn that you want to use.

 

[steeltech]

OK. That doesn't sound good. I used this procedure for another move and it worked. Don't remember the exact circumstances but it must be different.

OK, so I need the end user to use TN 18 2. When I do PRT for TN 18 2 it spits out:



TN 18 2
DATE
PAGE
DES

DES ADMIN
TN 018 0 00 02
TYPE 3902
CDEN 8D
CUST 0
FDN 7899
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 1
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLD
MWA LMPN RMMD SMWA AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN CDMR
CPND_LANG ENG
RCO 0
HUNT 7899
LHK 0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 7888 0 MARP
01 CFW 4 5296
02 RNP
03 SSU 0000
04 TRN
05 MWK 7899
DATE 19 SEP 2007


NACT



Is there a tutorial or walk through for building a new phone?

Can I copy a profile from another phone to a new phone?

 

[phonz1]

OK. That doesn't sound good. I used this procedure for another move and it worked. Don't remember the exact circumstances but it must be different."


LOL..... I can't

 

[steeltech]

I copied another TN to TN 17 14 and now it spits out:

TN 17 14
DATE
PAGE
DES

DES ADMIN
TN 017 0 00 14
TYPE 3902
CDEN 8D
CUST 0
FDN 7899
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 1
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLD
MWA LMPN RMMD SMWA AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN CDMR
CPND_LANG ENG
RCO 0
HUNT 7899
LHK 0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 5207 0 MARP
01 CFW 4 5296
02 RNP
03 SSU 0000
04 TRN
05 MWK 7899
DATE 15 FEB 2008


NACT
REQ: stat 17 14
IDLE

 

[tnphoneman]

Yes you can copy. At the REQ prompt enter cpy 1

you will have to change the rollover key dn after the copy

 

[steeltech]

Ok the copy worked. How do I move a user into a TN?

 

[steeltech]

Ok I think I understand now. I will need to create new phone so 18 2 can be used. Anyone know how I can do this?


TN 18 2
DATE
PAGE
DES

DES ADMIN
TN 018 0 00 02
TYPE 3902
CDEN 8D
CUST 0
FDN 7899
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 1
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLD
MWA LMPN RMMD SMWA AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN CDMR
CPND_LANG ENG
RCO 0
HUNT 7899
LHK 0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 7888 0 MARP
01 CFW 4 5296
02 RNP
03 SSU 0000
04 TRN
05 MWK 7899
DATE 19 SEP 2007

 

[steeltech]

I got it fixed. I outed 18 2 and moved 17 14 to it. It works!


Thanks to everyone for their input.

 

[acewarlock]

To MOV a phone, find the TN where your going to MOV it to and then just use the MOV from old TN to new TN.

You could also use some training, thy this site.

http://www.ghtrout.com/ghtrout/index.html

And you don't have to go to LD 11 to OUT a phone, you can do it in LD 20

Connected LD's are 10, 11, 12, 20, 21, 22, 32




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[tnphoneman]

The TN you are moving a set to has to be vacant before you can move it.

 

[acewarlock]

I have to stop ASSUMMING when telling people how to do something, they know what I mean.

Thanks tnphoneman




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[steeltech]

Thanks guys for all the info. Like I said in my previous post, once I outed 18 2 and moved 17 14 into it, IT WORKED!

Thanks for all the help!!!