Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Moving MAS90 3.21 To A New Server
- Thread starter rtam3044
- Start date
- Thread starter
- #2
greggmh123
IS-IT--Management
Wow, what a coincidence. After many months of a staged server migration, I just did a move yesterday (11/1/14) of MAS 90 for Windows 3.71 from an SBS 2003 server to Server 2012 R2 Standard. This procedure only works with MAS 90 for Windows 3.71 and maybe prior versions, but apparently nothing newer.
The key seems to be that **IF** you have no customizations of the programming (whatever that means...I am an IT guy, not a programmer), then you can copy the entire folder to a new server. You need to assign the Everyone group Full Control permissions to its parent folder on the new server, and then copy the contents to the new folder. My folder structure is D:\90W\MAS90 on the old server, and E:\90W is the new parent, so I assigned Full Control to E:\90W and all subfolders, and copied the whole D:\90W folder's contents from the old server to the new one.
I thought that I would need to re-run the workstation setups, but on a hunch, I asked my client's MAS 90 support people if just changing the mapped M: drive from old server to new server would work, because the shortcut just points to the mapped drive. Sure enough, changing the login script to delete the old mapping and re-map to the new server was all that was needed.
Gregg Hill
The key seems to be that **IF** you have no customizations of the programming (whatever that means...I am an IT guy, not a programmer), then you can copy the entire folder to a new server. You need to assign the Everyone group Full Control permissions to its parent folder on the new server, and then copy the contents to the new folder. My folder structure is D:\90W\MAS90 on the old server, and E:\90W is the new parent, so I assigned Full Control to E:\90W and all subfolders, and copied the whole D:\90W folder's contents from the old server to the new one.
I thought that I would need to re-run the workstation setups, but on a hunch, I asked my client's MAS 90 support people if just changing the mapped M: drive from old server to new server would work, because the shortcut just points to the mapped drive. Sure enough, changing the login script to delete the old mapping and re-map to the new server was all that was needed.
Gregg Hill
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question