Moving line onto KIM

[penroy]

I have a BCM 450 and a 1230 with a 18 KIM module,at present I have 8 analog lines connect to the system. I have added the lines to the 1230 phones.

How do I move or assign the lines to the KIM expansion or place some lines on the phone and some on the expansion?

 

[snowman50]

Assign the kim to the extn DN to allow lines to be allocated.
Cant remember were it is but i think its under global settings
Look for CAP/KIM heading.

If its Not there, open up all the taps and you should see it.

 

[penroy]

I will check and let you know.

 

[cook1082]

After you assign it you have to move the lines by using Feature 81.