Moving Desksets 2

[tvm146]

We are moving some employee offices to different locations within the building. I believe it is possible to have their desksets follow them without reprogramming VM and CCR or rewiring anything.

Can not find information in Call Pilot or BCM 50 manuals. Anyone know of a way to do this?

 

[acewarlock]

Move the wires, you'll be alot happier that you did.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[Wallysworld]

As long as there is station tone on the jack in the wall from your bcm 50 and you have "set relocation" turned on, you should just have to move the phones.
"configuration" -> "telephony" -> "Global settings" -> "feature settings

 

[tvm146]

We are in a seventy-three year old brick and stone building with plaster walls and ceilings. Rewiring through the building is both difficult and costly.

We have station tone on wall jacks in each office to be occupied.

That said, set relocation is the best option. Can this be programmed through a deskset?

 

[a12ozbottle]

I think Ace meant move the crossconnect at the frame, not the actual station cable.

 

[teleplop]

Set relocate is fine. Just don't move alot of the sets at the smae time.

Teleplop