Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
moving a cinphony from MICS A to MICS B
- Thread starter senk1s
- Start date
jerryreeve
Vendor
you will have to probably work with cintec on this since the serial number of the equipment is what they use for liscensing there may be some problems when you try to load the software on a second NAM. I would definately give CINTEC a call and see what their comments about it are.
JerryReeve
Communications Systems Int'l
com-sys.com
JerryReeve
Communications Systems Int'l
com-sys.com
It sounds like they are moving the existing NAM to another MICS. In that case I would still contact Cintech and find out if anything needs to be done, before it's too late.
cintechllc.com is there website. That should give you all the contact info you need.
cintechllc.com is there website. That should give you all the contact info you need.
NorstarWiz
Vendor
Just plug in the Nam to the new MICS. The Cinphony will continue to work just fine. The only thing you will see change is the KSU Software string.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question