Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Move PRI

Status
Not open for further replies.

jumi244

Technical User
May 19, 2009
7
BE
Hi,

I want to move 2 pri's but the synchro is active on one.

Could you give me the process to deactive the synchro and active on another pri?

Thanks

 
what PBX are we talking about here?

MD110/TSE?
what version?

please provide more information so that we can provide good answers.

Cheers,
Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Daddy,

I've a MD110_TSW_BC13.

I must use SCEXE and SCEXI but...

Risk? Parameters?...

Thanks in advance.

JUMI
 
risk is (almost) zero.
in fact everything in the LIM is synced by the LSU. The external sync just 'trains' the LSU. So if you remove PRI, the sync will continue internally. You will only run into troubles with a new LSU card that has not been trained for a week of two...

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top