Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

mount

Status
Not open for further replies.

mario

Technical User
Jul 27, 2000
2
MX
i have linux red hat 7.3 installed on my primary hard drive. the problem is that i can't mount second hard drive on wich i have winXP installed with fat 32 file system
i tried mount -t vfat /dev/hdc/dir command but it's not working please help..
 
This is the command...

mount -t vfat /dev/hdc /mount_point

You have to specify a mount point in your Linux filesystem (/mnt/win for example). I don't think that you can mount a directory without mounting the entire drive first, but I could be wrong.


ChrisP
 
1: create a dir where you later want your win partition in:
eg: mkdir /windows
2: mount it:
mount -t vfat /dev/hdc /windows
 
hdc? why not hdb0? The quickest way to become an old dog is to stop learning new tricks.
- John Rooney
 
Depends on whether the "second hard drive" is the primary slave or the secondary master.

hda = pri master
hdb = pri slave
hdc = sec master
hdd = sec slave
 
I have a similar problem ... I have a 5.25" floppy that Linux Mandrake 7.2 is completely ignoring. Any ideas? --Dan Hirsch
CEO of DanSoft
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top