moh input on siemens hcm 200

[dhudock]

i am a voice tech for muzak and need to hook up
one of our digital repeaters to the moh input for
the hcm 200, i.e. is there a moh port on one of
the cards ?? thanks in advance !!

 

[DrTouchTone]

MOH is done thru a SLMA port (analog TR)....if you dont know how to program the switch, you need to get someone who DOES to set up the MOH port..then just interface at 600ohm with LESS than 0dbm level...the line will have DC on it...put a blocking cap in line and use a xfmr to couple...Can give you the whole programming procedure IF you have a qualified tech who can do it (and who has the EMMA software). PhD DTMF