MOH input 8 Ohms/3 watt or 600 Ohms??? 2

[curlycord]

Client has Promo device and those are the 2 choices on their output.
Manual states MOH input but not spec,only page port mentions Ohms.

Which one do we use? 8 or 600?

Thanks

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[cook1082]

600 Ohms.
8 could blow the port.

 

[fireeater]

yes technically it is 600 ohms
but have connected headset jacks from mp3 players ,and cd players and they are 8 ohm, but again true ,you could blow the port if put to loud from music device

_____________________________________
S.H.A.D.O.
_____________________________________

mike

 

[curlycord]

Thanks dudes

Lucky I told them 600 anyway since Norstar is but wanted to be sure on BCM.

Cheers
cc

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[coneil]

The music source can be any approved low-power device such
as a radio with a high-impedance earphone jack. The
recommended ICS input level is 0.25 V rms across an input
impedance of 3300 ?


Any music source with a low-output impedance, less than
3,300 ?, can be connected. The output level must be less
than one volt.

Chris