Modem setup

[12122053]

How do you install a modem to the router I see the AUX port with a RJ-45 connection also does anybody know the commands how to setup the router for dial-in access. Thanks

 

[qwasimoto]

Yes. Use the rollover cable that comes with the router. There should be a 25 pin modem connector for it also. Use a USRobotics 56k fax/modem or equiv for best results.
Enter these commands in line aux 0 config:
modem InOut
transport input all
flowcontrol hardware
Use username and password if you wish. Set modem to auto answer. Use Hyperterm to connect if in Windows.
If you have trouble:
clear line aux 0 - to reset
Try this chat script:
in global config mode,
chat-script reset "" "AT&F1&H1&R2&B1&A3X4&S0=1"
in line aux 0 config
chat script reset reset
This works for 3600 and down with an aux.

 

[12122053]

Thanks alot qwasimoto, I'll give it try.

 

[jeter]

line aux 0
exec-timeout 30 0
password ????
login
modem inout
modem autoconfigure discovery
transport input all
speed 115200

This should be all that you need... Jeter@LasVegas.com
J.Fisher CCNA