modem settings foer meridian RAS

[mjdave]

Hi
I would like to find out what the settings are for a option 11 remote modem settings (AT commands) I have looked into the NTP's but the settings don't always work. IS there anyone who has the correct settings to configure a modem. I normally try and use US robostics fax 56k. I try and it works for a while and then doesn't respond. I have tried different setting normally ATe1,q0,&d0,&n6 and so on but don't always work.

 

[Meridianmaster]

I have 2 modems Courier for connecting
Remote (connected to Meridian):
B0 C1 E0 F1 M1 Q1 V1 X7 Boud 9600 Parity n Wordlen 8
&a1 &b1 &c1 &d2 &g0 &h1 &I0 &k1 &l0
&m4 &n0 &P0 &R1 &S0 &U0 &X0 &Y0 %N6
Switches ON: 4,9 (other OFF)

MY (only differences) E1 X4 Q0 &A3 &P1 &Y1
Switches ON(3,8,5)

May be some of these is not important but it works

 

[omarrj]

us robotics sporster 56k
set switches s1,s3,s7,s8 down
the rest up
connect terminal
power on modem
at&b1&w&w1
power off
set switches s1 and s4 down the rest up
end

 

[mjdave]

Thanx I will give this a go.