Modem Issue 1

[MERIDIAN11C]

hello

I can connect to the Modem but just only have access to PDT
and when i type SL1Input its frezze and then go back to PDT and i can type anything

any idea ?

the only way that i have is reboot in PDT and wait, and then have access to the PBX but made a reboot everytime
is wrong

thanks

 

[MERIDIAN11C]

And Thanks to all for respond

 

[acewarlock]

Your using lower case logi,
you need to use CAPS LOGI ADMIN1

Why change the engine if all you need is to change the spark plugs.

 

[MERIDIAN11C]

is the same
the modem still not respond

 

[MagnaRGP]

Login on TTY 03 using CAPS.

>LOGI ADMIN1

Once you login, go to LD 37, stat tty and post.

Also go to LD 22, prt ADAN and post.

 

[MERIDIAN11C]

pdt>
pdt>
pdt>
pdt>
pdt>
pdt> exit
PDT in Progress. Please Wait....
Done!

0000 ADMIN1
I still connected to the system but I just can type PDT

 

[MagnaRGP]

TTY 03 SCH MTC TRF BUG 15:23
OVL111 IDLE 0
>logi admin1
TTY 03 SCH MTC TRF BUG 15:23
OVL111 IDLE 0
>logi
TTY 03 SCH MTC TRF BUG 15:23
OVL111 IDLE 0


Connect as you did to obtain the above posting you made earlier and login using CAPS.

 

[MERIDIAN11C]

yes i did using CAPS but I dont receive answare from the PBX
i mean the system do not answare with
TTY 01 SCH MTC BUG

or

OVL111IDLE

 

[MagnaRGP]

Ok....back to basics.

Find TTY 0 physically and connect it to your computer serial port (you will need a NULL modem or cable). Set your terminal to 8,N,1 and whatever speed the DIP switches on the SSC card indicate the speed of the port is.

Press Enter 4 or 5 times and try logging in both with caps and not.

Capture and post.

 

[MERIDIAN11C]

MagnaRPG

i did on TTY 0 and press Enter 4 or 5 times and the PBX do not respond
on the TTY 1 is the same
The Dip is on 9600
the reboot is needed

pdt>
pdt>
pdt>
pdt> reboot
PDT in Progress. Please Wait....Done!

Warm Start begun - reason 41

INI003 000000B0 000000B4 000000D0 000000D4 000000D8
ACDR ACTIVATED
INI003 000000B0 000000B4 000000D0 000000D4 000000D8
ACDR ACTIVATED

DTA203 1 64

DTA203 9 64

ERR225 0 1

VAS008 ADMIN VSID 9 CUST -- TIME & DATE 20:13:40 11/10/2007

AUD370 VSID 9 CUST --

SRPT731 OS 0: Warm Start
Release: x112530
Created: Friday November 17 17:08:02 EST 2000
Last Cold Start: 8/10/07 19:26:00 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 8/10/07 19:26:38
INIs since cold start ( 8/10/07 19:26:38): 2

SRPT752 INI 0: INI completed in 16 seconds

DTC103 0

FROM THIS STEP I CAN GET ACCESS

The question is why the reboot to get access


TTY 01 SCH MTC BUG CTY 20:15
OVL111 IDLE 0
>logi aladmin2
PASS?

WARNING: THE PROGRAMS AND DATA STORED ON THIS SYSTEM ARE LICENSED TO
OR ARE THE PROPERTY OF NT/BNR AND ARE LAWFULLY AVAILABLE ONLY TO
AUTHORIZED USERS FOR APPROVED PURPOSES. UNAUTHORIZED ACCESS TO ANY
PROGRAM OR DATA ON SYSTEM IS NOT PERMITTED. THIS SYSTEM MAY BE
MONITORED AT ANY TIME FOR OPERATIONAL REASONS. THEREFORE, IF YOU
ARE NOT AN AUTHORIZED USER, DO NOT ATTEMPT TO LOGIN.

.
TTY #01 LOGGED IN ALADMIN2 20:16 11/10/2007

>ld 37
IOD000
.stat tty

TTY 0 : ENBL
TTY 1 : ENBL DES: MODEM
TTY 2 : ENBL DES: cdr
TTY 8 : DSBL
.****
OVL000
>ld 22
PT2000
MARP NOT ACTIVATED


REQ prt
TYPE adan tty

ADAN TTY 0
TTY_TYPE SDI
CAB 00
CARD 00
PORT 0
DES
FLOW NO
USER MTC SCH BUG
TTYLOG 0
BANR YES
ADAN TTY 1
TTY_TYPE SDI
CAB 00
CARD 00
PORT 1
DES MODEM
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH CTY BUG
TTYLOG 0
BANR YES
ADAN TTY 2
TTY_TYPE SDI
CAB 00
CARD 00
PORT 2
DES cdr
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER CTY
ADAN TTY 8
TTY_TYPE LSL
CAB 00
CARD 10
PORT 0
DES
BPS 1200
BITL 8
STOP 1
PARY NONE
FLOWTYPE MAIL

 

[acewarlock]

Have you tried a complet shutdown of power and then power backup?

Why change the engine if all you need is to change the spark plugs.

 

[MERIDIAN11C]

yes i did yesterday and is the same
i only have access one time
either reboot or shutdown
the second time i go back to the same all the TTY do not
respond

 

[thattekguy]

try to out your tty ports and rebuild them, do you have the latest patches, TTY 1 is set for cty..is that the modem port, maybe it is getting filled up with CDR records.

 

[MERIDIAN11C]

thattekguy

the system has 3 years installed with the same tty config
but i gone try erasing the CTY on TTY 1

thanks

 

[thattekguy]

Maybe you need to change out the SSC card

 

[MERIDIAN11C]

first

thanks to all for help on this

and i had to change the SSC Card to fix the problem

again thanks