Modem Initstring?

[wahacom]

Hi All.

I tried to connected with built modem in BP250,but BMS give me message:
cannot connect to system!
{10980} Modem connection can not be created (ERROR).
ModemInitstring not accepted.

Please help me.

 

[MirkoGradassi]

In profile setting, where you see the modem string, try to delete everithing is afret the last "&", and also, try to change the strin X4 to X3. Afret the string will be something similar:

&FE0Q0V0X3&D2S2=29S0=0

Bye
Mirko

 

[wahacom]

hi mikro
thanks ,after changing init string i have manageD to connect to the system modem
then started to read directory
then message (system could not be initialized code:4020)

"i have also tried with init string :S0=1M1
AND I HAVE GOT THE SAME RESULT"
REGARDS

 

[MirkoGradassi]

Try initi string X3

Bye
Mirko

 

[Ozzietech]

This is the string i used to use with no hassles to connect to a BP250
L1 S11=70 E0B0V0Q0X0&D2S2=29S0=0

I do know that some early versions of CPUD5 had faults with the modems on them so that also could be the culprate

 

[VMPOP]

use only this E0B0
try it it worked for most cases for me

cheers ///