Modem Configuration!

[Ccastillo2310]

Hi everyone!

I have a question whit modem configuration.

DFM -560EL
I need programming this modem for connect to Meridian PBX, this modem goes to customer site.

Thanks for your help.

 

[swamyt]

Add one extension to the pbx system and allow outgoing call from that extn and wire it to the modem voice port.

 

[McGruff753]

If I'm reading your post correctly, this modem will be used to dial into the PBX? It is a bad idea to use a PBX analog for the system modem. You should use a POTS (Plain Old Telephone Service) line.

 

[faelo]

I tried this before with the US Robotics and works, it's cheaper than other Modems.

US Robotics modem configuration


Terminal 9600 N-8-1

1- turn off modem
2- Switches 1, 3, 7 & 8 on
3- turn on modem
4- AT&F0&B1&W&W1
5- turn off modem
6- Switches 1 & 4 ON