Mobile twinning possible with POTS lines? 1

[demchak]

I have a small client with only 4 analog pots lines.
They would like to have the 2 sales people able to use mobile twinning.

Is there a work around to allow mobile twinning with analog lines or do you have to have a T1 to make mobile twinning work?

It would be a new IP office install.

Thanks

 

[Greybeard191]

you can have forwarding to a mobile phone, assuming you turn on analog trunk-trunk connect.

But mobile twinning requires a PRI, and using any of the FNE features additionally requires DID number(s) on that PRI.

GB

 

[Bas1234]

Or add a cheap sip line.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[IPGuru]

Don't do it!

4 lines & 2 mobile users is not a good mix regardless of line type

each forwarded call will use 2 lines (1 in 1 out) so if both salesmen receive a call no one else in the business can do anything until 1 of them finishes!



Mundus vult decipi decipiatur ergo.

 

[Ekster]

Be aware that using analogue trunks with mobile twinning will stop the internal extension ringing at the same time as the mobile phone.

from manager help file - mobile twinning:

Analog Lines
These types of lines do not provide call progress signalling. Once a twinned call has been sent to an analog line, the system assumes that it has been answered and stops ringing the primary extension.



+++ Divide By Cucumber Error. Please Reinstall Universe And Reboot +++

 

[ipofficeman]

New or old instlal the system/lines are not setup to work in this way

Upgrade the lines or dismiss the idea

 

[Pepp77]

Install 1 x ISDN2 (BRI) line and use that just to send out the twined part of the call?

| ACSS SME |