Mobile EXT issues ring once 1

[mitelritz]

i have configured a ME on a 200icp but now this config on our 3300 is working but my tui logging is giving this error and staying at start registering stage.
and i did check the mac address and it was blank and my set reg code is what is programmed in system options is correct
my outgoing works so does my user.

but I also have a weird issue when ME is active my set only rings once and then calls my cell.
i cant get it to ring like 4 or 5 times at the same time as my cell.



thanks







below is output for the tui Isue


processMts22Minet(): Exceeded PIN reply threshold. Pin **18401 is invalid, or incorrect phone type configured.
2008-03-03 23:17:57.198307500 WARN - Design - PhoneBaseContext.abortRegistration(): Registration for (Mc2TuiAgent(Dn 8401)) was aborted
2008-03-03 23:17:57.198317500 WARN - Maint - PhoneBaseContext.waitAndReconnect(): (Mc2TuiAgent(Dn 8401)) will reconnect to 3300Icp in 17518ms
2008-03-03 23:17:57.198659500 ERR - Design - MiNetChannel.initiateRead(): Connection for (MiNetChannel(Unconnected)) not open








thanks; )

 

[TheMitelGuy]

What do you mean "on why with the Miatai code"?

I would assume your **6 keys are not always being heard by the Mobile Extension - dial slower and longer.

I don't understand your last question about CID? Can you be clearer? As long as it accepted by your Telco you should be able to see the caller's CLID and not that of your office.

Click on Thank TheMitelGuy at the bottom of one of my posts.

 

[mitelritz]

for the CID to pass the call that originally called the twin. to the Twinned users Cell..

yea its weird for the **6

i pushed them slower like 8004 would not transfer for the life of me.