Has any one got these cards to work on G430 CM5.2.1 Fully patched sp10 and Latest firmware installed for g430 to allow mm721.
Other threads do show people having problems but no fixes yet
I cant get the card to put lines in service. Show out of service
I did get dial tone for a while but when i busy out/ release board i have lost the lines again.
When i did have the lines working and using TAC code i got dial tone
But call wont go through.
ISDN Lines have been checked by me with an ISDN tester and i can make and receive calls.
Card replaced with another
Its doing my head in.
The one thing i have noticed in media-Gateway it says its a MM720 even though the card is MM721.
I removed all translations, remove card successfully.
Reinstalled card and it returns as MM720.
Installed card it different slot to test V2,V3 slots.
Any help will do
Other threads do show people having problems but no fixes yet
I cant get the card to put lines in service. Show out of service
I did get dial tone for a while but when i busy out/ release board i have lost the lines again.
When i did have the lines working and using TAC code i got dial tone
But call wont go through.
ISDN Lines have been checked by me with an ISDN tester and i can make and receive calls.
Card replaced with another
Its doing my head in.
The one thing i have noticed in media-Gateway it says its a MM720 even though the card is MM721.
I removed all translations, remove card successfully.
Reinstalled card and it returns as MM720.
Installed card it different slot to test V2,V3 slots.
Any help will do