Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MM5.1 Backup fails

Status
Not open for further replies.

phoneman662000

Technical User
Jan 26, 2004
5
US
I have a 5.1 MM and auto backups fail with and error write protect is on.
I have verified the DVD is correct and swapped out the DVD also.
Any idea's
Thanks
 
What type of hardware are you using? What is the media type?
Are you using DVD-RAM diskettes or DVD-RAM disk?
Are you using the Panasonic DVD-RAM 4.7GB disks?
 
Its is a 8730 server, using Panasonic DVD-RAM 4.7GB disk. This system does not us the older DVD's that was in the cartridges.
Thank you for answering.
 
The 8730's are know for having this issue. they seem to work for a while after install and then fail. I have replace a few 8730's and it fixes the problem for a few weeks at best. i would set it to backup to FTP and then demand (if you are under SSU)a S8800 or other server to replace the 8730.

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
FTP is a better choice. If its a large system the nightly backup is bigger then 4.7G so backup to DVD RAM isn't practical. Also unless you swapping medium you only have 1 backup.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top