MM webClient install issues

[BPSPhill]

Trying to install web client. have loaded the windows O/S for exch and domino onto the DL360 server , as told this is a better base to start from.
get the server up and assign a nmae and configure the corp LAN connectivity. load Web client, the use the 5.2 upgrade app.
when I tried to carry out the port settings and security I had a lot of issues trying to run the commands in the manual.
However when I run a IVY test the system is looking for RealSpeak\Realspeak 4.0.5
This is nowhere to be forund on the system.
this was an out of hours job so my window of oppertunity closed.
I have looked on this site and found some info I will use going forward but has anyone had issues ar any tips. Much apprechiated as the P.M. is now chasing me

 

[kepetersen]

The RealSpeak software is on the DVD2 of the MAS application disk. Look for Folder 'RealSpeak 2.5 SDK' contents of the RealSpeak folder.
Other items not told in the manual is the need to load the .net files:
The Server is identified by this label 'Web Client / WSO' and has Windows 2003 with 1.1 & 2.0 .NET Framework loaded. To configure this server for Web client and the WSO tool you must load the 3.5 .NET Framework too. The filename is dotnetfx35.exe off the Windows site. This will load the 3.0 & 3.5 .NET Framework software.

Hope this helps

 

[KenMeans]

Never heard of Web client looking for real speak before

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[KenMeans]

Just one other thing. You said you installed "loaded the windows O/S for exch and domino onto the DL360"

Web client only works with the Avaya message store and not Exchange or Domino.



Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)