Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MM 3 to S8700 - MWI Problem

Status
Not open for further replies.

charmstrong

Vendor
Feb 7, 2006
28
GB
Hi,

Anybody have any suggestions with a MWI problem I'm having.

When I restart the MM MWI Service I get an error in the application log - event id 143, Failed to Get Credential for ..... IMAPI.

Now, I have tried:

Re-typed the password in security setting of mas
Moved the password from mss1 to mss1.nvmd.local in security
Re-typed the password for the VVSTS in the trusted server
Removed the VVSTS and re-added in trusted servers

I am still get the alarm above and when looking at the OHV I am seeing no attempt to send MWI requests out.

Any suggestions would be gratefully received.

Cheers
 
Sure sounds like a password issue to me. I would check your host file on the MAS and make sure that the mss1 is in it with the right PRI IP and reenter the passwords again. make sure it is all lower case in both. Are you getting any other errors?

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Thanks but I know it's not a hosts issue as I can ping everything.

Given up and re-imaging as we speak!!!!
 
And when you ping it is going out the right NIC card right?

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top