I have enabled MLDN on my option 81c. I am allowing sets in two separate buildings (two different SUPL's) to have the same DN. I usually create phones by copying them from a template TN that I have created. When trying this with a DN that is already in service I get an error. I have been creating them from scratch (NEW...3904...ect.) this however takes me three times as long. Is there anyway around the error?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MLDN 1
- Thread starter lozan
- Start date
-
1
- #2
EddieDuece
IS-IT--Management
Is the set you are trying to copy monitored by another set? If so, remove the set from monitoring set.
EddieDuece
IS-IT--Management
Create the new new devices using a psuedo DN, so you can use the copy command, then go back in and make an easy change to add the MLDN to the set. Make sense?
- Thread starter
- #4
- Status