BarryNelson
IS-IT--Management
Recently bought ML380 G1, downloaded smartstart 5.5 cdrom, erased system with disk, re-setup from smartstart cd but when i select the drive array configuration from the menu, it says insert floppy & system will reboot but nothing happens after re-boot when i press f1 (to boot) or f10 (for system utils).
I created the drive array configuration floppy disks from the smart start cd. Looked at disk but it is not a dos bootable disk....
Its driving me mad! What am i doing wrong - all i want to do is setup my 2 scsi discs in mirror.
Thanks
Barry
I created the drive array configuration floppy disks from the smart start cd. Looked at disk but it is not a dos bootable disk....
Its driving me mad! What am i doing wrong - all i want to do is setup my 2 scsi discs in mirror.
Thanks
Barry