MiVoice 400 - Trunk Digit Modification

[danramirez]

Hi, I have no background with the A400, so apologies if it is a silly question. My background is with the 3300/MiVB.

Is it possible to establish a SIP Trunk and out pulse all digits without any modification, including any leading digit?

let's put this as an example:

If user dials 0912900082 then the A400 out pulses all digits including the leading 0, that is 0912900082

and if user dials 43 then the A400 out pulses 43 without adding/deleting any digit (that is 43).

please let me know if this is possible and how? my expert mates on the 400 will understand your suggestions.

cheers,

daniel

http://www.hatkanatelecom.com

 

[jabbo99]

I'm new to the MiVO 400 as well. Not sure but maybe via the Call identification (CLIP) settings found in the SIP Trunk Group. That may be for all calls and NOT outbound calls from each user.

 

[sarond]

How many destinations are you talking about? Or prefixes.

There are 2 things that come to mind. Either LCR or Private Networking (Either SIP or PISN depending on scenario)

I've not done a lot with either so my assistance is going to be limited.