Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MIVB Console - Attendant Recall Timer

Status
Not open for further replies.

fishhead64

Technical User
Apr 25, 2007
110
US
We have calls recalling to the Attendant Console instead of going to the employee's vm box. How do I adjust the Attendant Recall Timer? I see that it's a COS setting, but I can't see a COS setting on the IP Attendant Console.
Is there a COS applied to an Attendant Console and if so, where do I see what it is?
Thanks
Al



Thanks!
Al Feinberg
MiCollab 9.6.0.105-01
Mitel Standard Linux 11.0.99
OVA 9.4.1.8
MiVoice Business Release level: 9.4
NuPoint Unified Messaging Build: 20.6.0.4.01
 

MiVB Console Class of Service is set in 'Station Attributes' form.
 
Thanks, found it.
So the COS for the Attendant is 1.
COS 1 No Answer Recall Timer is 36

My phone, also COS 1
COS 1 Call Forward No Answer Timer is 26

Call to the attendant, transferred to my phone still recalls back to Attendant.

Is there a different setting for Attendants?

What am I missing?


Thanks!
Al Feinberg
MiCollab 9.6.0.105-01
Mitel Standard Linux 11.0.99
OVA 9.4.1.8
MiVoice Business Release level: 9.4
NuPoint Unified Messaging Build: 20.6.0.4.01
 
What's "Allow Recall after Transfer" set for in that COS?
 
It's set to NO.
Which adds another oddity to this. It shouldn't recall at all, correct?

Thanks!
Al Feinberg
MiCollab 9.6.0.105-01
Mitel Standard Linux 11.0.99
OVA 9.4.1.8
MiVoice Business Release level: 9.4
NuPoint Unified Messaging Build: 20.6.0.4.01
 
If 'Allow recall after transfer' is set to no, then the call will follow reroute or call forward.

But only if the 'call forward no answer timer' is less than the 'no answer recall timer'

Sounds like 'allow recall after transfer' is set correctly.

What is your 'no answer recall timer' set to?

You may also need to check the trunk class of service timers too. As they are the originating device probably.
 
No Answer Recall is set to 36, Call Forward No Answer is set to 26.

Looks like the Trunk COS says Allow Recall After Transfer = NO and No Answer Recall Timer is 120


Thanks!
Al Feinberg
MiCollab 9.6.0.105-01
Mitel Standard Linux 11.0.99
OVA 9.4.1.8
MiVoice Business Release level: 9.4
NuPoint Unified Messaging Build: 20.6.0.4.01
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top